Requirement of Wall Safes for Your Residence

Wall safes come in many different sizes and types. Some of those wall safes are fire proof and some are not. Let us have a look at what you should consider before going out and purchasing a wall safe for your dwelling. If you are looking Ahead of installing or have installed a wall safe, you should take into consideration your wall thickness. It would be evident that a wall safe with a depth of ten inches would not really fit in a standard wall created out of two by four inch studs. The final width of a normal stud could be three and one half inches. That will be the thickness of the gap on your wall between the 2 sheets of drywall. Some outside walls will have two inch studs giving you a five and one half inch width, but it would not always be convenient to set your wall safe in an outside side wall. You could allow the additional length hang into a cupboard, but that might be very inconvenient and give away the fact that you have got a wall safe also.

Wall Safes

The normal depth of a Safe for a normal sized will be approximately three and one half inches to coincide with the standard sized wall. Outside measurements will vary a lot depending on the size that you are searching for. First have a look at what you are excited about placing in your safe. In addition, this can aid you in determining what length and width to receive as well. You can find a safe with only key entry or one with a combination lock on it. The combination locks are usually either a dial or digital keypad types. 1 thing to consider here is using the digital types are battery life. All so what would occur if the batteries would go bad and flow. The electronics could be destroyed and your safe must be fixed.

With a good old Standard combination kind dial lock, you just have to dial in your mixture, and you are on your wall safe. You would not need to worry about batteries going bad and having to take time out to replace them when you might be in a rush to go somewhere of possibly not have a new set to install. Once you have your Wall safe installed all you have got to do is hang something over it to hide it. Most people will use a picture or a mirror. Use whatever will seem the most natural for the area it is in. Like anything that you do for your home safety, tell no one of your new purchase. Look at this siteĀ